Kids,, meet your SS engine with a simple cam upgrade...

[Hopkinator]

http://www.youtube.com/watch?v=9Vh1xtBWDXo

Cam swap . And some big meats on the back. :eek:

[demonspeed]

It's not going to happen on the Camaro without a bunch of weight loss.

[mmarcum]

If a cam was enough to make the Camaro dip into the high 11's, I would be happy.

[tazjetman]

i think he had more than a cam... but boy did that thing sound GREAT!

[demonspeed]

i think he had more than a cam... but boy did that thing sound GREAT!

Like full bolt ons, a tune, maybe some gears...

[tazjetman]

Like full bolt ons, a tune, maybe some gears...

thats more like it, i highly doubt that that was the stock exhaust

[demonspeed]

From Corvette Forum...

10.66 @ 131.68 - Doug@ECS - 08 Z51 M6 NPP -Blistens, H &C CAI, hdrs, 3.90, tune DR - (3198)

http://forums.corvetteforum.com/1568959958-post3764.html

[tazjetman]

From Corvette Forum...

10.66 @ 131.68 - Doug@ECS - 08 Z51 M6 NPP -Blistens, H &C CAI, hdrs, 3.90, tune DR - (3198)

http://forums.corvetteforum.com/1568959958-post3764.html

overachiever!

[demonspeed]

Just remember that there are Corvette guys cringing at the abuse that is unleashed in that video :lol:

[LorcinLS1]

I think hig 11's is very possible in the camaro

[tazjetman]

Just remember that there are Corvette guys cringing at the abuse that is unleashed in that video :lol:

bunch of babies!! i drive sports cars like their meant to be driven!

[demonspeed]

bunch of babies!! i drive sports cars like their meant to be driven!

Or you could put a bunch of sweet mods on it like a leather center console cover, or painted vents or louvered tail light covers. Then, you can get your microfiber cloth out and wipe it down over... and over... and over... while your buddies stroke your ego with how nice of a car it is even though you never drive it.

Ok, I'm stereotyping. I will stop. :cool:

[tazjetman]

lol

[slims00ls1z28]

Or you could put a bunch of sweet mods on it like a leather center console cover, or painted vents or louvered tail light covers. Then, you can get your microfiber cloth out and wipe it down over... and over... and over... while your buddies stroke your ego with how nice of a car it is even though you never drive it.

Ok, I'm stereotyping. I will stop. :cool:

I didn't think it was stereotyping if it was true :lol:

Much like 4x4 owners with thousands in mods with huge lifts and tires that have never seen mud.

[demonspeed]

I didn't think it was stereotyping if it was true :lol:

Much like 4x4 owners with thousands in mods with huge lifts and tires that have never seen mud.

Sorta like this...

http://i146.photobucket.com/albums/r279/dennismla1999/lifted.jpg

[54inches]

bunch of babies!! i drive sports cars like their meant to be driven!

Who let you drive their sports car?

[tazjetman]

Who let you drive their sports car?

your mom

[80s_Adam]

Who let you drive their sports car?

Oh dang lol

[Jekyll-N-Hyde]

I'm curious what numbers an L99 automatic will make with a Tune , exhaust and some bolt on's ?????????????


And a few of you on here mentioned the guy in this video probably had gear work done as well......im not familiar with IRS cars and there rearends im an old school solid rear axle 3.90's with a detroit locker :D kind of guy what can we do to a camaro rearend wise to make our cars scream ??????


:confused: John ????? lol :lol:

[demonspeed]

3.91's will probably be the popular gear for the 5th gen. It is not a cheap swap, though.

[Jonz5GEN]

I'm curious what numbers an L99 automatic will make with a Tune , exhaust and some bolt on's ????????????

I've said it before and I'll say it again......mid to low 12's with a good driver and the above mentioned mods.:thumbsup:

[Got Me SOM]

With a stall that's possible. Not on the stock converter. You'll need a good 3500 stall to get this car to accelerate.

[54inches]

With a stall that's possible. Not on the stock converter. You'll need a good 3500 stall to get this car to accelerate.

No you won't.

I bet good money you won't have to touch the tranny to go deep in the twelves.

I love haters!

[Cavette]

Just remember that there are Corvette guys cringing at the abuse that is unleashed in that video :lol:

This is one Vette guy that likes to show and go. Not afraid to abuse the equipment.:5go::gears:

[demonspeed]

Use them what they're made for!

[OverAnxious]

Comparing apples to oranges.

[Got Me SOM]

No you won't.

I bet good money you won't have to touch the tranny to go deep in the twelves.

I love haters!

:confused::rolleyes:
I speak from experience, Its not about hating, I used to have a 02 Auto SS, went 12.4 with a lid, converter and nittos..They need converters.. Think bout it, 3800 lbs is not easy to get moving off the line.

How much you wanna bet? Might as well make this interesting.

[slims00ls1z28]

With a stall that's possible. Not on the stock converter. You'll need a good 3500 stall to get this car to accelerate.

With a trap of 111 mph 12's stock are not only possible but very likely and given we have a dyno of a GXP putting over 410 to the wheels with just a cat back and tune. Cat back tune headers and DR's lmid to low 12's.

[54inches]

:confused::rolleyes:
I speak from experience, Its not about hating, I used to have a 02 Auto SS, went 12.4 with a lid, converter and nittos..They need converters.. Think bout it, 3800 lbs is not easy to get moving off the line.

How much you wanna bet? Might as well make this interesting.

Well you just proved your own ass wrong.

If your 2002 WITHOUT a STALL is DEEP into the 12's, like I said, then why in the hell would a 2010+ need a converter.

I am done with you as you post crap.

I do however believe at some point, the car will need a converter, but to get into the low 12's, NOT.:5go:

Keep it up as the 54's bandwagon is on the way to prove you wrong.:lol:

And BTW, I'll bet my left MAPLE Nut, wait I don't have to as the GXP is already doing it.:thumbsup:

You comment was that you needed a stall converter to get to the mid low 12's and your 2002 wwas already there......


Go away with that contradictory dribble.:STFU:

[bad2000z]

I agree, it won't need a converter to go low 12's imo. We'll see.

[Greg Z]

I know I am a late poster on this thread (but hey, I did just sign up today:D), but there is no way in hell that C6 only had a cam:lol::lol::lol:

and if it did, Boy, did I sure waste my money on those twin turbos I have on my Vette.

Mine with 19in CCW's and KDW's ran an 11.4 @ 121.
on ET STreets I will get an 10:9 like this so called cammed only C6
http://www.youtube.com/watch?v=IuMB6i9xgpQ

[weland]

From Corvette Forum...

10.66 @ 131.68 - Doug@ECS - 08 Z51 M6 NPP -Blistens, H &C CAI, hdrs, 3.90, tune DR - (3198)

http://forums.corvetteforum.com/1568959958-post3764.html

DAyum!

(LATER to this thread. Thanks in advance for all the necro awards *bow* :lol:)

[Jekyll-N-Hyde]

A lot of people are not mentioning that this car seemed to have 3.90's out back for the rearend :thumbsup: I for one know what 3.90's will do to an Fbody however I do think there is more than what he is saying.

[Hopkinator]

I WILL not have insults and false bravado tossed around on MY thread ! well, unless I sanction a gloved bout with 20 percent of the betting haul , and a big seat with free popcorn to munch. Ok then its alright..

[gdcod3player]

just a cam wow
that is freaking quick