ok i have everything wire up except accesories such as ac and some lights like check oil or low oil lights but i can get it to turn over but no spark how do i test the ignition coil and wires running there any help would be appritiated im only 17 and reallly need my car running
Just a guess, but the LT1s were pass keyed, so if you don't have that system hooked up, you'll have to buy a bypass module for it.
great suggestion... I would look into that first. There should be 2 white wires on the steering colum going to the ingition switch. You can bypass it by measuring the resistance of the "chip" on the key from your donor car and then solder in a resistor with the same value between those 2 wires.