Join Date: Mar 2006
Location: Grand Prairie, Texas
ADM Performance Intake - A ***** of an install due to its exacting fit. Couldn't really get the filter under the cover comfortably. There is pressure against the cover which causes the washer filler cap to pop open. I used a little spacer to hold it down at the front which seems to work. The instructions say that the Neg jump start stud will be relocated but doesn't indicate where.
+1 on the install issues. I had the same ones. To fix the water bottle issue you will have to adjust it from the bottom. Open the front fender liner, and loosen the water bottle. Then you can adjust it and the re tighten the nuts.
I just put the Negative jump screw into a opening on the engine block. We need to call Andy to find out where it really belongs.
But it looks sweet.
94 Firebird Formula (Drowned 8/30/05) RIP
2010 Camaro SS IBM 2SS/RS, 6M, ADM CAI, Borla Type S Cat Back, VMAX Ported TB, LG Short Throw Shifter, Hotchkis Max Chassis Brace, BC Racing Coilovers, Hotchkis Sway Bars, Whiteline Cradle Bushings.