New Sema Products - ModernCamaro.com - 5th Generation Camaro Enthusiasts
5th Generation Camaro News & General Discussion News Articles & General Discussion about the 5th Generation Camaro.

 
LinkBack Thread Tools
post #1 of 5 Old 11-12-2014, 04:53 PM Thread Starter
Member
 
christianchevelle's Avatar
 
Join Date: Jul 2013
Location: Salem Oregon
Posts: 217
 
New Sema Products

Well cruising through the SEMA products the new MSD airforce intake is intriguing and may want to get one someday especially if Vararam never posts their results, and interestingly enough there is a gear drive now out from comp cam that fits under the stock cover for the timing chain I may just have to do and glad I stuck with the stock chain..... Any one else hear of some good products out there? I know there are quite a few, and the results for the MSD intake manifold were done on a modded ls7 LPE for like 38 h.p. and 20 tq so it does not say much for a ls3 and will have to wait and hear later from others who install...... Also the cover for it is well......meh.....

MSD 2703 Airforce Intake Manifold, LS3/L99, 2008-13 Corvette/Camaro/SS - Speedway Motors, America's Oldest Speed Shop

SO ....any thoughts on the newer products?

2013 2ss/rs NPP CRT, Forged 428 ls3 stroker, Mast windage, GMPP ported heads, Katech chain, Trunnion upgrade, Cam motion stage 3, SP headers, Vmax PTB, Monster c7 dual clutch, Mgw shifter, Fluidampr 25%UDP, CAI induction, rocket racing wheels, clutch reservoir, bmr toes and trailing arms, Lpw diff cover , scanner, drl's led /fogs, elite catch can, MRT louvers, tint, ZL1 spoiler, stripes & badging, etc....
christianchevelle is offline  
Sponsored Links
Advertisement
 
post #2 of 5 Old 11-12-2014, 06:31 PM
Senior Member
 
monzaruba's Avatar
 
Join Date: Jan 2013
Location: Aruba
Posts: 807
 
Looks sweet...!!

http://i261.photobucket.com/albums/ii75/monzaruba/foto3_zps6fbde664.jpg
A Camaro you steer with the rear wheels...!
monzaruba is offline  
post #3 of 5 Old 11-14-2014, 04:41 PM Thread Starter
Member
 
christianchevelle's Avatar
 
Join Date: Jul 2013
Location: Salem Oregon
Posts: 217
 
This was the written part of the phastek email I got.........

The 2014 SEMA Show in Las Vegas was last week and we have all the 5th Gen Camaro coverage you could ask for!



Click Here to view our Special SEMA Show COUPON at Phastek!



NEW PRODUCT HIGHLIGHTS From the 2014 SEMA SHOW For 2010-2015 CAMARO:

COMP: COMP has announced a range of new products, including the Gear-Drive Timing Kit for our LS Engines. Gear-Drives are the Strongest & most accurate timing sets on the market, and they work with both stock oil pump & timing covers. Also, the new All-Black FAST RHS LSX-R Intake Manifold. They have also announced their 102MM Throttle Body with Electronic Control for our LS3, L99, and LSA Camaro Engines! It includes a Black Powdercoated Finish for excellent aesthetics. More airflow with less restriction than stock!

- -


Hooker Headers new Blackheart line: Hooker Headers is releasing a new line of Exhaust Parts for 5th Gen Camaro's, including Full Length Long Tube Headers in both 1-3/4' and 1-7/8'. Lightweight 18-gauge 304 Stainless Steel, 3/8' CNC laser cut flanges for maximum sealing surface and strength, Smooth precision primary tubes for maximum power generation, Long transition collectors with merged spear for reduced backpressure and increased exhaust velocity. Hooker also has new products for Camaro ZL1, 1LE & SS models with NPP Exhaust, their Quad-Tip Axle Back Exhaust w/ Mufflers. Hooker also has an Exhaust system for regular SS models, an axle-back exhaust w/ mufflers and single-tips.

- -


HURST Suspension & Exhausts: Hurst announced a new line of Suspension Lowering Springs, Sway Bars, and Exhaust Systems for 2010-2015 Chevrolet Camaro SS, 6.2L, V8 models, with the Hurst Logo on the Exhaust Tips!

- -


MSD Atomic Air Force Intake Manifold: MSD had their new Intake Manifold for LS Engines on display, showing gains of 36 Horsepower and 16 LBS-FT of Torque, on a modified engine, an LPE Z28 Camaro to be exact. This intake manifold is made out of Polymer material that resists heat soak and minimizes weight.

- -


QTP Exhausts: QTP has released a wide range of new, exciting products for our 5th Gen Camaro's. The QTP Electric Exhaust Cut-Outs are now available as a complete bolt-on kit - no longer requiring welding! QTP has small kits that bolt on after your cat pipes, and before your X-Pipe, as well as complete Cat-Back Exhaust Kits with built-in QTP Cut-Outs. QTP has also announced a Muffler System for the 2010-2015 Camaro with a built-in Exhaust Cut-Out, as well as Remote control features< for opening and closing the Cut-Outs, no longer requiring a Rocker-Switch! QTP also has Muffler Delete Pipes w/ Exhaust Tips.

- - -


New Aftermarket ZL1 Front Fascia: Fresh from the aftermarket, is a new factory-style ZL1 Camaro Front Fascia that will be available for order, ready for paint. Coming soon!

-



*** NEW GM/Chevrolet Accessories Aftermarket Factory-Upgrades! The 'Chevrolet Accessories' program is packed full of Factory-Spec Z28 & 1LE Performance Parts ready to bolt-on to your SS and V6 Camaro! Everything from Suspension, Driveline, and Styling!

- - -



--------------------------------------------------------------------------------



2014 Camaro Z/28 (Nurburgring Record Car!)


2015 Camaro Green Flash Limited Edition


SEMA 2014 - 2015 Camaro Commemorative Edition (1)

2013 2ss/rs NPP CRT, Forged 428 ls3 stroker, Mast windage, GMPP ported heads, Katech chain, Trunnion upgrade, Cam motion stage 3, SP headers, Vmax PTB, Monster c7 dual clutch, Mgw shifter, Fluidampr 25%UDP, CAI induction, rocket racing wheels, clutch reservoir, bmr toes and trailing arms, Lpw diff cover , scanner, drl's led /fogs, elite catch can, MRT louvers, tint, ZL1 spoiler, stripes & badging, etc....
christianchevelle is offline  
 
post #4 of 5 Old 11-15-2014, 05:17 AM
Veteran Member
 
83Hokie's Avatar
 
Join Date: Aug 2012
Location: Virginia
Posts: 4,590
 
Hooker Headers ... they used to be big back in the 70's but I haven't seen any of their stuff related to newer cars ... is this a re-emergence into the market or have I just been missing it (easily could be the case)

2012 2SS / RS CRT; Additional Options: Highwing Spoiler, Sunroof, Window Tint, Splash Guards, Wheels, Nitro, Heritage Grill, MRT Louvers, Ported Throttle Body, Cold Air Inductions CAI, RX Sport Hood, someone's splitter, River City Strut Bar
Born On: 13 April 2012; Purchased: 27 August 2012
83Hokie is offline  
post #5 of 5 Old 11-16-2014, 08:48 PM
Junior Member
 
Join Date: Nov 2014
Location: Nor Cal
Posts: 17
 
Hooker has been around but with nothing really new,since purchased by Holley(??) they will get more up to date!! American Racing Headers had some beautiful exhaust systems including 50 State legal AND V6 Camaro headers made in Stainless!
Jeffthenail is offline  
Sponsored Links
Advertisement
 
Reply

Quick Reply
Message:
Options

Register Now



In order to be able to post messages on the ModernCamaro.com - 5th Generation Camaro Enthusiasts forums, you must first register.
Please enter your desired user name, your email address and other required details in the form below.

User Name:
Password
Please enter a password for your user account. Note that passwords are case-sensitive.

Password:


Confirm Password:
Email Address
Please enter a valid email address for yourself.

Email Address:
OR

Log-in










Thread Tools
Show Printable Version Show Printable Version
Email this Page Email this Page



Posting Rules  
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

 
For the best viewing experience please update your browser to Google Chrome