Got My CAM! - ModernCamaro.com - 5th Generation Camaro Enthusiasts
V8 Engine Discussion 6.2L LS3/L99 V8 | Exhaust | Ignition | Induction | Intakes

Reply
 
LinkBack Thread Tools
post #1 of 23 Old 03-07-2011, 07:58 AM Thread Starter
Member
 
IOMCowboy's Avatar
 
Join Date: Jun 2010
Location: Copperas Cove, Texas
Posts: 387
 
Got My CAM!

I got my Stage II Comp CAM Installed last week. I am just posting now because I wanted time to enjoy the car before I posted.

I dropped my car off at SNL Performance Wed the 2nd of March. Let me say that SNL Performance has a very nice facility with very knowledgeable and professional staff. They were very nice and did a very nice job on my car. When I arrived at their shop they imediately put my car on the Dyno for a baseline so they and I would know the gains from the CAM.

I did not get the same numbers on their dyno that i had gotten on the dyno from the shop that originally tuned my car. I know there is a difference between dyno's so I chalked it up to that. They did not leave it at that though. They went into the tune and check it out and showed me where the problems were.

I appears that the other tune was 413 RWHP and 401 RWTQ at Wide Open Throttle. I was tuned to get my max HP at 6200 RPM. They re-tuned my car before even doing the CAM and got me back up to 406 RWHP and 412 RWTQ. They would have kept trying but I told them that was good enough for a baseline. I loved their willingness to keep trying.

I was again surprised by their dedication when I was pulling out of the parking lot one of their mechanics was pulling in to their shop and soped me to ask how I liked it. I was even more surprised when I got 60 miles down the road and was called by Steve, The S in SNL Performance, and he asked me how I was enjoying it.

Their Customer Service is off the chart. I highly recommend them if anyone is looking for a great shop that truely cares about you and your

car.



Here is the video.


Here is the dyno graph.


Texas Speed 1 7/8 LT Headers, Texas Speed High Flow Cats, Magnaflow 3 inch Cat Back Exhaust, SNL V2 Comp CAM, Texas Speed Underdrive Pully, G5CR CAI, Hurst Short Throw Shifter, JetFlo Mass Air Sensor
My car is exactly that; No one has to like it but me!
IOMCowboy is offline  
Sponsored Links
Advertisement
 
post #2 of 23 Old 03-07-2011, 08:02 AM Thread Starter
Member
 
IOMCowboy's Avatar
 
Join Date: Jun 2010
Location: Copperas Cove, Texas
Posts: 387
 
If the graph is hard to see look at it here.

http://i1189.photobucket.com/albums/...eamer/Dyno.jpg

Texas Speed 1 7/8 LT Headers, Texas Speed High Flow Cats, Magnaflow 3 inch Cat Back Exhaust, SNL V2 Comp CAM, Texas Speed Underdrive Pully, G5CR CAI, Hurst Short Throw Shifter, JetFlo Mass Air Sensor
My car is exactly that; No one has to like it but me!
IOMCowboy is offline  
post #3 of 23 Old 03-07-2011, 01:54 PM
Senior Member
 
jlugo's Avatar
 
Join Date: Jun 2009
Location: Temple, Texas
Posts: 502
 
Nice!!!...

.

jlugo is offline  
 
post #4 of 23 Old 03-07-2011, 02:38 PM
Premium Member
 
Kunk1963's Avatar
 
Join Date: Oct 2010
Location: Harker Heights, TX
Posts: 2,624
 
Garage
Sounds Good tooo...


Retired US Air Force & Loving Life!!!
2012 Corvette "Centennial Edition" Coupe
2012 Grand Sport 3LT
Kunk1963 is offline  
post #5 of 23 Old 03-07-2011, 02:49 PM Thread Starter
Member
 
IOMCowboy's Avatar
 
Join Date: Jun 2010
Location: Copperas Cove, Texas
Posts: 387
 
Thanks guys!

Texas Speed 1 7/8 LT Headers, Texas Speed High Flow Cats, Magnaflow 3 inch Cat Back Exhaust, SNL V2 Comp CAM, Texas Speed Underdrive Pully, G5CR CAI, Hurst Short Throw Shifter, JetFlo Mass Air Sensor
My car is exactly that; No one has to like it but me!
IOMCowboy is offline  
post #6 of 23 Old 03-09-2011, 08:27 PM
745RWHP, 660RWTQ
 
BLACK10's Avatar
 
Join Date: Apr 2009
Location: BREAUX BRIDGE,LA.
Posts: 1,259
 
Congrats! Having a cam is great isnt it?

BOURQUE'S HOT RODS
[email protected], 1.455 60'
Built 376ci, TH400 Trans
BLACK10 is offline  
post #7 of 23 Old 03-09-2011, 10:07 PM
Veteran Member
 
Join Date: Jan 2008
Location: Texas
Posts: 4,818
  
Welcome to the Cammed Camaro Club

Not to mention the stage 2 Comp Cam Club
Jekyll-N-Hyde is offline  
post #8 of 23 Old 03-10-2011, 03:53 PM
Veteran Member
 
TX_SS's Avatar
 
Join Date: Feb 2009
Location: San Antonio, TX
Posts: 2,794
 
Good results, sounds great

2SS/RS, CGM, A6, Magnuson TVS2300 Supercharger
My latest dyno: http://www.youtube.com/watch?v=XjrLR0N12B4
TX_SS is offline  
post #9 of 23 Old 03-10-2011, 07:36 PM
Member
 
dconradt's Avatar
 
Join Date: Sep 2010
Location: Wisconsin
Posts: 358
 
OMG!! That sounds better than a Fleetwood Mac concert.

2SS/RS L99 A6, RotoFab CAI, Kooks LT headers w/High Flow cats, Borla CAT back, Heritage grill, SmartMirror, ABL lighting, drilled and slotted rotors w/Hawk pads, 400 watt amp.


Life is too short to drive an ugly car.
I bought mine from Camaro Scotty!
dconradt is offline  
post #10 of 23 Old 03-10-2011, 07:49 PM
Veteran Member
 
Join Date: Jan 2008
Location: Texas
Posts: 4,818
  
I probably already know but what's the lift on that cam?
Jekyll-N-Hyde is offline  
Sponsored Links
Advertisement
 
Reply

Quick Reply
Message:
Options

Register Now



In order to be able to post messages on the ModernCamaro.com - 5th Generation Camaro Enthusiasts forums, you must first register.
Please enter your desired user name, your email address and other required details in the form below.

User Name:
Password
Please enter a password for your user account. Note that passwords are case-sensitive.

Password:


Confirm Password:
Email Address
Please enter a valid email address for yourself.

Email Address:
OR

Log-in










Thread Tools
Show Printable Version Show Printable Version
Email this Page Email this Page



Posting Rules  
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

 
For the best viewing experience please update your browser to Google Chrome