Dyno video - 732rwhp CMS built & tuned, Whippled PFAFF Racing Engine - ModernCamaro.com - 5th Generation Camaro Enthusiasts
V8 Engine Discussion 6.2L LS3/L99 V8 | Exhaust | Ignition | Induction | Intakes

 
LinkBack Thread Tools
post #1 of 9 Old 04-19-2013, 10:58 AM Thread Starter
Member
 
Simon.w's Avatar
 
Join Date: Aug 2010
Location: San Clemente
Posts: 105
 
Dyno video - 732rwhp CMS built & tuned, Whippled PFAFF Racing Engine

So it's finally ready ... and well worth the wait!

732rwhp + 644ftlbs ... what a brilliant effort!

A HUGE thank you to Ryne and Mike and CMS and Gordy, Joe and Steve at PFAFF Engines, Chris and Tim (TA Performance) from Mantic.

I am absolutely confident that I had the very best people in my corner on this project ... and the results speak for themselves!

Cms built whippled 2011 Camaro 732rwhp 644 rwtq - YouTube

782.5rwhp 680 rwtq 2011 Inferno Orange 2SS, STRUT 22" Icon5 Rims & Grille Kit, Mahle Pistons, Manley Rods, Custom Comp Cam, ARP Bolts, Melling HV Oil Pump, Whipple SC, 3.5" Pulley, 8 Rib Pulley Kit, Innovators West 10% Overdrive Balancer, LT Headers, Borla 3" Exhaust, ADM Fuel Pump, 80lb/hr FIC Billet Tip Injectors, RX Monster Catch Can, CAI Intake, ADM Race Scoop, Mantic 9000 Series Clutch, Hurst Shifter, Eibach Springs. Motor built by PFAFF Engines. Fitted & tuned by Cunningham Motorsports.

Last edited by Simon.w; 04-24-2013 at 10:46 AM.
Simon.w is offline  
Sponsored Links
Advertisement
 
post #2 of 9 Old 04-19-2013, 01:03 PM
Veteran Member
 
Chapel's Avatar
 
Join Date: May 2012
Posts: 1,690
 
Very impressive!!

2017 Camaro ZL-1 A10

2013 Jeep Grand Cherokee Hemi 5.7 - Tuned!!

Proud to be the March 2013 Member Of The Month!
Chapel is offline  
post #3 of 9 Old 04-19-2013, 02:37 PM
Member
 
javi05's Avatar
 
Join Date: Jul 2012
Posts: 394
 
wowzers!!!! good job!

2011 camaro 2ss convert..black on black. Slp black wing intake, k&n drop in , muffler delete , 93 octane diablo tune L99/A6. totaled 12-4-13..

2014 camaro 2ss 1LE. best car yet!!!!
javi05 is offline  
 
post #4 of 9 Old 04-19-2013, 02:43 PM
Senior Member
 
monzaruba's Avatar
 
Join Date: Jan 2013
Location: Aruba
Posts: 807
 
wowww...

http://i261.photobucket.com/albums/ii75/monzaruba/foto3_zps6fbde664.jpg
A Camaro you steer with the rear wheels...!
monzaruba is offline  
post #5 of 9 Old 04-19-2013, 09:22 PM Thread Starter
Member
 
Simon.w's Avatar
 
Join Date: Aug 2010
Location: San Clemente
Posts: 105
 
Thanks everyone ... yeah pretty happy with that result! (understatement of the year!)

782.5rwhp 680 rwtq 2011 Inferno Orange 2SS, STRUT 22" Icon5 Rims & Grille Kit, Mahle Pistons, Manley Rods, Custom Comp Cam, ARP Bolts, Melling HV Oil Pump, Whipple SC, 3.5" Pulley, 8 Rib Pulley Kit, Innovators West 10% Overdrive Balancer, LT Headers, Borla 3" Exhaust, ADM Fuel Pump, 80lb/hr FIC Billet Tip Injectors, RX Monster Catch Can, CAI Intake, ADM Race Scoop, Mantic 9000 Series Clutch, Hurst Shifter, Eibach Springs. Motor built by PFAFF Engines. Fitted & tuned by Cunningham Motorsports.

Last edited by Simon.w; 04-19-2013 at 09:26 PM.
Simon.w is offline  
post #6 of 9 Old 04-21-2013, 08:56 AM Thread Starter
Member
 
Simon.w's Avatar
 
Join Date: Aug 2010
Location: San Clemente
Posts: 105
 
Well I brought it home today ... didn't want the 1 & 1/4 hr drive to end! It is totally the best of everything. Sounds unbelievably tough when its sitting there idling, then gets up and pulls incredibly strong all the way through the rev range ... and then becomes very civilized on the highway with no drone or cam surging.

LOVE IT! Thanks Ryne!

782.5rwhp 680 rwtq 2011 Inferno Orange 2SS, STRUT 22" Icon5 Rims & Grille Kit, Mahle Pistons, Manley Rods, Custom Comp Cam, ARP Bolts, Melling HV Oil Pump, Whipple SC, 3.5" Pulley, 8 Rib Pulley Kit, Innovators West 10% Overdrive Balancer, LT Headers, Borla 3" Exhaust, ADM Fuel Pump, 80lb/hr FIC Billet Tip Injectors, RX Monster Catch Can, CAI Intake, ADM Race Scoop, Mantic 9000 Series Clutch, Hurst Shifter, Eibach Springs. Motor built by PFAFF Engines. Fitted & tuned by Cunningham Motorsports.
Simon.w is offline  
post #7 of 9 Old 04-21-2013, 09:29 PM Thread Starter
Member
 
Simon.w's Avatar
 
Join Date: Aug 2010
Location: San Clemente
Posts: 105
 
Dyno sheets

Here are the dyno sheets:






782.5rwhp 680 rwtq 2011 Inferno Orange 2SS, STRUT 22" Icon5 Rims & Grille Kit, Mahle Pistons, Manley Rods, Custom Comp Cam, ARP Bolts, Melling HV Oil Pump, Whipple SC, 3.5" Pulley, 8 Rib Pulley Kit, Innovators West 10% Overdrive Balancer, LT Headers, Borla 3" Exhaust, ADM Fuel Pump, 80lb/hr FIC Billet Tip Injectors, RX Monster Catch Can, CAI Intake, ADM Race Scoop, Mantic 9000 Series Clutch, Hurst Shifter, Eibach Springs. Motor built by PFAFF Engines. Fitted & tuned by Cunningham Motorsports.
Simon.w is offline  
post #8 of 9 Old 04-22-2013, 12:41 PM Thread Starter
Member
 
Simon.w's Avatar
 
Join Date: Aug 2010
Location: San Clemente
Posts: 105
 
Gotta also say, that Mantic 9000 Series clutch is amazing. Pedal feel is no harder than stock, no shudder or slipping issues .... even with a big cam and over 700rwhp.

This is what I ended up going for: Performance Clutches | Twin Disc

782.5rwhp 680 rwtq 2011 Inferno Orange 2SS, STRUT 22" Icon5 Rims & Grille Kit, Mahle Pistons, Manley Rods, Custom Comp Cam, ARP Bolts, Melling HV Oil Pump, Whipple SC, 3.5" Pulley, 8 Rib Pulley Kit, Innovators West 10% Overdrive Balancer, LT Headers, Borla 3" Exhaust, ADM Fuel Pump, 80lb/hr FIC Billet Tip Injectors, RX Monster Catch Can, CAI Intake, ADM Race Scoop, Mantic 9000 Series Clutch, Hurst Shifter, Eibach Springs. Motor built by PFAFF Engines. Fitted & tuned by Cunningham Motorsports.
Simon.w is offline  
post #9 of 9 Old 04-27-2013, 05:44 PM
Member
 
S.Bretz's Avatar
 
Join Date: Jan 2013
Location: Lutz, FL
Posts: 384
 
Yeah, twin disc units are awesome like that. I a lot of cases you can get away with using stock material on the friction discs to that you still get a long service life out of the unit plus double the torque holding capacity at no extra pedal effort.

Kevlar has an even longer service life yet I don't see it used much. Its either OEM material or ceramic. The ceramics hold a lot better, but I have been threw too many of them..the ceramic eats the **** out of the pressure plate and the flywheel. If you had an aluminum flywheel its not much of an issue since you can get new inserts, but if you have a steel FW, then you have to resurface...and can only take out so much before on some cars before you have adjustment issues or friction disc to spline contact issues on the trans input shaft; if the disc does not slide all the way onto the splines the powertrain will vibrate like crazy because the disc will clamp slightly off center.
S.Bretz is offline  
Sponsored Links
Advertisement
 
Reply

Quick Reply
Message:
Options

Register Now



In order to be able to post messages on the ModernCamaro.com - 5th Generation Camaro Enthusiasts forums, you must first register.
Please enter your desired user name, your email address and other required details in the form below.

User Name:
Password
Please enter a password for your user account. Note that passwords are case-sensitive.

Password:


Confirm Password:
Email Address
Please enter a valid email address for yourself.

Email Address:
OR

Log-in










Thread Tools
Show Printable Version Show Printable Version
Email this Page Email this Page



Posting Rules  
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

 
For the best viewing experience please update your browser to Google Chrome