Why no a High powered white ?
5th Gen Camaro Fog Light LED Bulbs! Match RS Factory Halos! USA-Made SLF!
Chevrolet Camaro Fog Light LED Bulbs
Diode Dynamics carries LED bulbs for replacement of your Chevrolet Camaro's fog lights (or DRLs), in all major sizes. This will make your Camaro's lights a clean white color temperature that will closely match factory LED halos! Just simple plug and play, replace the bulb and you are good to go!
Diode Dynamics offers the brightest, highest-quality bulbs on the market. Your order will ship same day, and we're here if you need us for support and service. These LED bulbs are designed our engineering team here in St. Louis, and every bulb carries with it a three-year limited warranty.
Brightness:
Diode Dynamics also offers multiple bulb models for different amounts of brightness for Camaro RS and Non-RS Models:
- HP48: 265 lumens. Lower brightness than factory, but still provides the crisp white, modern color of LEDs.
- XP80: 510 lumens. Similar brightness to factory.
- SLF: Street Legal Output. Much brighter than factory. These are bright! USA Made!
These bulbs are made up of a quality plastic connector to slide right into the plug, as well as high durability terminals. A load resistor is embedded to prevent blowing the LEDs from voltage surge, and a diode is implanted to protect the LEDs from reverse polarity. The LED is wired for 12V operation, the kind found on all modern vehicles.
Included in your order is TWO BULBS (to fit your Chevrolet Camaro).
Diode Dynamics' products come with a 30-day satisfaction guarantee and a 3-year limited warranty.
Click below for more info or to order:
Diode Dynamics: DRL/Fog Light LEDs for 2010-2013 Chevrolet Camaro RS
Diode Dynamics: Fog Light LEDs for 2010-2013 Chevrolet Camaro (Non-RS)
Diode Dynamics: Fog Light LEDs for 2014-2015 Chevrolet Camaro (Non-RS)
Diode Dynamics: Fog Light LEDs for 2014-2015 Chevrolet Camaro RS
Diode Dynamics: DRL/Fog Light LEDs for 2012-2015 Chevrolet Camaro ZL1
If you have any questions, please don't hesitate to post, PM, email [email protected] or call (314) 205-3033
*PM us for the free-shipping code* (U.S. forum members only)
Thanks for looking!
Nick C.
Customer Submitted Photos
![]()
![]()
![]()
![]()
Customer Reviews:
"Fast delivery, easy plug and play, great compliment to the RS HID.
Very pleased with the output and looks." (Posted on December 16, 2013)
"Should have bought these sooner. What a difference they make. Very easy install. Highly recommend these!!" (Posted on July 30, 2014)
"Good product and fast delivery, tried other fog light bulbs that didn't work, this product was perfect" (Posted on July 7, 2014)
"Installed my new fog light bulbs last week and they look amazing with my stock RS headlights. I hated the yellow contrast on the stock DRL / fog light bulbs. The colors of bluish/ white match almost perfect." (Posted on August 5, 2014)
Customer Submission with Diode Dynamics LED fog lights installed on a ZL1
1 - 20 of 53 Posts
But in HP-SMD ?
?
?
We have HP and SMD options available, and XP for the Camaros that use the H16 sized bulb.But in HP-SMD ?
If you have any questions, give us a call and we can clear things up for you: (314) 205-3033
Thanks!
Nick C.
![]()
Diode Dynamics Car of the Month Contest
Submissions Due June 10th
Please submit the following to [email protected]:
3 High Resolution Images of your vehicle (with at least one image showcasing your DD purchase)
Name and Hometown
Year, Make and Model
Each month?s winner will be announced in the Diode Dynamics monthly newsletter and on social media outlets. Winner will receive a T-shirt and $50 gift card from Diode Dynamics.
**Must have at least ONE Diode Dynamics product on your vehicle. All submissions are subject to approval. By submitting photos, you are giving Diode Dynamics the right to use them for marketing purposes.
Nick C.
offer... thX much for adding us to your contest :5go::thumbsup:
Cool! But my order shipped the day before your free shipping code.
But I must admit that the order was for my new Suburban not the Camaro.
But I must admit that the order was for my new Suburban not the Camaro.
I apologize that you didn't receive the code in time. Send us a PM before you place your next order :thumbsup:Cool! But my order shipped the day before your free shipping code.
But I must admit that the order was for my new Suburban not the Camaro.
Also, if you submit photos with products installed you can receive Diode points for a discount off a future order
Nick C.
Thanks Nick, I'll do that. I got your package today and will install the new stuff tomorow morning and take some photos. Had a new Ranch Hand Cattle Guard installed on the truck today and might cause some problems getting to the bulbs.
Sounds good!Thanks Nick, I'll do that. I got your package today and will install the new stuff tomorow morning and take some photos. Had a new Ranch Hand Cattle Guard installed on the truck today and might cause some problems getting to the bulbs.
Good luck with the install, hopefully that bumper doesn't make access impossible
Nick C.
Thanks for the reply. I saw those you quoted but those do not exactly fit my 2013 2SS Camaro with HID light and Daytime running lights. (Owners Manual states DRL's are PSX26W's for 2013 SS Camaro with HID's and DRL's package) All I see in your site are the P13W's or the H16's which are not the same as the original bulbs for the Daytime running light of my 2SS. See attached photos of what I mean. Some sites explain that you can make the P13W's fit into the wiring harness of a PSX26W but the actual tabs on the base of the bulb that screws into the assembly don't exactly fit but you can make it screw in by forcing it a little. I don't want to "force" any bulb to fit. Thanks again for the reply.
Attachments
I replied to your post but don't know why it was taken off. Anyways, your site only has the P13W or H16 style bulbs. The 2013 Camaro's (and some 2012's) use PSX26W bulbs. The P13W's can be made to work on the harness but don't fit exactly in the housing where you screw the entire bulb in because of the tabs not lining up correctly. I don't want to force it in, I want an exact fit. So to reword my original question....Do you make a PSX26W LED replacement bulb?
Attachments
1 - 20 of 53 Posts
