Modern Camaro Forums banner

1 - 20 of 20 Posts

·
Registered
Joined
·
1,782 Posts
Discussion Starter #1 (Edited)
Hey guys One of our guys pulled out his washer bottle and did nothing else the car is tuned headers and cai, made a big difference he said.

My question to my trusted Camaro maniacs ? how much difference will the adm scoop make. Is it worth it ? Or will the washer bottle remove be enough ?
Thanks

also in Hot rod they weighed the bottle full that fcuker wa 9 lbs ! so mine is probably staying out

also what does the bottle removal entail looks easy If the 10 was in the garage id be taking it out now but the 69 has seniority
 

·
Premium Member
Joined
·
4,818 Posts
I have the ADM RACE CAI ( So does REDJEWL ) Its a Sealed CAI BOX with a internal IAT sensor.
What makes this CAI work so good is the removal of the Washer bottle and the Air scoop.

I installed a digital IAT sensor guage inside the CAI Box. This morning it was 42 outside and when I hit the On Ramp to get on the highway she was reading 46 degree's of air inside the box going into my Engine. When I reached the parkinglot it said 43 degree's

Talk about forced air or the closest thing you will get without a supercharger.

When you look down from the filter towards the ground you see the hole where the scoop is bringing air into car towards the element.

usually when I get on the highway in the mornings that I drive my Camaro if its cool I can step into it midways up the ramp and you will hear the engine SCREAM and come to life. You can feel the car sucking air Big time as it climbs harder and harder :thumbsup: I do have a ported and polished throttle body however after we added the CAI/Scoop when its takes in air it whistles as it takes on air everyone thinks im supercharged.

Tomorrow morning its supposed to be the coldest day yet we will have this year ( expected mid to high 30's ) with no moisture in the air expected I may drive the Camaro and just enjoy going to work once again . This will be the coldest day yet since my conversion along with the ADM CAI install.

TRUST ME GET ONE

The Cold air inductions CAI is a lot like the ADM its sealed just like the ADM is so every bit of air you are forcing in that Box stays in there. That washer bottle blocks a lot of air for sure get rid of it and find another way to hold your washer fluid like a bag or something :thumbsup:
 

·
Registered
Joined
·
1,420 Posts
Mike.. Are you losing it. You are talking about 9 lbs like wow.. You really want the car to go faster. Go on a diet.. :lol: Get the rear gears and call it a day... :thumbsup:
 

·
Registered
Joined
·
1,782 Posts
Discussion Starter #4
Thanks bro so basically no bottle im good air scoop im better, I saw on some other camaro website a small bottle that does the job but with money being saved for other mods and my 2yr old turns 3 Christmas eve and the little guy turns one Nov 16th I need to wait a bit for the scoop. Pedders lowering sprigns next maye BMR sways.

does my tune need to be adjusted for this mod ? I hope not just had it done for my ARH headers last week dont feel like making the trip
 

·
Registered
Joined
·
1,782 Posts
Discussion Starter #5
Mike.. Are you losing it. You are talking about 9 lbs like wow.. You really want the car to go faster. Go on a diet.. :lol: Get the rear gears and call it a day... :thumbsup:
I am bro Im down to 206lbs lightest I have been since im 23 lean and mean brother, gears im going to wait on a bit but its going to happen.
 

·
Registered
Joined
·
1,420 Posts
I am bro Im down to 206lbs lightest I have been since im 23 lean and mean brother, gears im going to wait on a bit but its going to happen.
:lol::lol: Hard to believe.. I think someone has the pics of your head stuck in the DD box last week at the dam.... :lol::lol:

Not like im talking about weight.. I remember the last time I weighed 206.. I was in 4th grade... :rotflmao::rotflmao::rotflmao::rotflmao:
 

·
Premium Member
Joined
·
4,818 Posts
No Mike you dont need to adjust your tune at all.

Take the drivers wheel off and remove the wheel liner ( black liner ) takes like 10 minutes and it VERY easy that way :thumbsup:

if you need anymore info and get stumped PM me I think I got pics of mine somewhere in my Million pics.


Yeah lose that dam washer bottle and throw in the scoop FEED the motor some air :thumbsup:


Mike you have a Chuck Cow Tune dont you ? I love his Automatic Tranny Tune :thumbsup: he is the mastermind of the A6 imo.
 

·
Registered
Joined
·
1,782 Posts
Discussion Starter #9
I have been doing some non expensive mods lately hid the front plate blacked out my bezels, this will be another, found it on auto agenda $75 free shipping. saves me $10
It wont get in the way too too much of my Pedders drops savings
 

·
Registered
Joined
·
1,782 Posts
Discussion Starter #12
yes I have a Chuck Cow tune Love the tune. The A6 tune is crazy

with the mods I have now the car is pretty nuts , doing a stall speed this month too

Cold air inductions CAI
Chucks cow tune
ARH 1 7/8s
3 inch X pipe
Spintech axle back
 

·
Registered
Joined
·
4,449 Posts
the main difference when just removing the washer bottle is more air flow that the filter can pull, but once you get the scoop, that air is forced up to the intake directly from the front of the car, so however fast you're going, thats how fast the air is rushing to the filter. without the scoop, the engine has to pull the air from inside the bumper where there isn't any air flow.

if your worried about losing the ability to wash your windshield, get a washer bag like i did, replace the pump on the bag with the OEM pump attached to the original washer fluid reservoir, and mount it like i did:

http://www.moderncamaro.com/forum/showthread.php?t=22572

no wiring needed! just move the pump over and the wire harness and tube connect right up!
 

·
Premium Member
Joined
·
4,818 Posts
the main difference when just removing the washer bottle is more air flow that the filter can pull, but once you get the scoop, that air is forced up to the intake directly from the front of the car, so however fast you're going, thats how fast the air is rushing to the filter. without the scoop, the engine has to pull the air from inside the bumper where there isn't any air flow.

if your worried about losing the ability to wash your windshield, get a washer bag like i did, replace the pump on the bag with the OEM pump attached to the original washer fluid reservoir, and mount it like i did:

http://www.moderncamaro.com/forum/showthread.php?t=22572

no wiring needed! just move the pump over and the wire harness and tube connect right up!

couldnt have said it any better myself. :thumbsup:
 

·
Registered
Joined
·
1,782 Posts
Discussion Starter #15
scoop shipped already, going to pull the washer bottle out first today. Drive it around for a bit. Then add the air scoop when it arrives so I can give a real honest review of the product. Im sure its going to be great. Just curious becuase one of our guys just pulled the bottle and he was impressed with the difference so im sure the air scoop will be even better. pretty excited.
 

·
Registered
Joined
·
257 Posts
Does anyone know if this will work the same with the LSR cold air intake?
 

·
Registered
Joined
·
124 Posts
scoop shipped already, going to pull the washer bottle out first today. Drive it around for a bit. Then add the air scoop when it arrives so I can give a real honest review of the product. Im sure its going to be great. Just curious becuase one of our guys just pulled the bottle and he was impressed with the difference so im sure the air scoop will be even better. pretty excited.
So....what's the verdict? How about did the butt dyno like it?
 
1 - 20 of 20 Posts
Top