Modern Camaro Forums banner

1 - 20 of 37 Posts

·
Vendor
Joined
·
353 Posts
Discussion Starter · #1 · (Edited)
Camaro Footwell LED Kit! RGBW Multicolor & Single color options! Control w/Smartphone!


Looking to add a little color to your Camaro's interior? Diode Dynamics' RGBW Multicolor Footwell LED kits are the way to do it! By adding Diode Dynamics' LED strips under your dash, you can add RGBW color-changing ability to your Camaro's footwell area.

This kit is not just RGB, it is RGBW! That means there is an extra integrated LED chip that is specifically white in color, right next to the standard red, green, and blue LEDs. By using an RGBW controller, you can activate and control the white chip independently of the colors. This provides a much more uniform, pure, and bright white color than the traditional method of combining all RGB signals.

Our Bluetooth Controller will allow you to choose any color under the sun, including True White, directly from your phone! Our mobile app includes a wide variety of features including strobe and fade effects, preset colors, Camera Match, Music Sync, and much more. Our controller will also allow you to adjust the brightness of the LED strips. Any time you power up your strips, they will default to the last color that was previously selected.

These LED strips in this kit are highly flexible and waterproof. They feature high-density LED chips for brighter output and barrel-style M8 connectors for a secure connection.

Included in the 2-Piece Kit:

  • Two (2) 50cm RGBW SMD30 Strips
  • One (1) wiring harness (4-foot)
  • Two (2) quick splices
  • One (1) red LED toggle switch
  • One (1) DC-to-DT adapter
  • Four (4) zip-ties
  • One (1) 3M outdoor adhesive pad
Included in the 4-Piece Kit:

  • Four (4) 50cm RGBW SMD30 Strips
  • One (1) wiring harness (4-foot)
  • Two (2) quick splices
  • One (1) red LED toggle switch
  • One (1) DC-to-DT adapter
  • Eight (8) zip-ties
  • Two (2) 3M outdoor adhesive pads
  • Two (2) RGBW M8 extension wires



The 2-piece kit includes everything you need to install LED strips in the front footwell area on both the driver and passenger side of your vehicle. The 4-piece kit includes everything you need to install LED strips in the front and rear footwell areas on both the driver and passenger side of your vehicle. This kit is very universal in nature and can be tapped into any 12V power source that you would like when installing.

Any questions email us at [email protected]

PM us for the free-shipping code (U.S. forum members only)

Thanks!

Collin O.
 

·
Registered
Joined
·
4,590 Posts

·
Support MC & Troops
Joined
·
11,807 Posts

·
Support MC & Troops
Joined
·
11,807 Posts

·
Vendor
Joined
·
353 Posts
Discussion Starter · #7 ·
Looking at some point / time, doing a floor light in blue, to match my ambient lighting..
LUV to do the rings if they can be doubled up (side-by-side) w/my RS tube ones ?
The footwell kit can be used in conjunction with our RGB cupholder inserts, using the same remote. It can be changed to any color, and customized to match the OEM color closely :thumbsup:

Nick C.
 

·
Support MC & Troops
Joined
·
11,807 Posts

·
Registered
Joined
·
4,590 Posts
Getting plans in order ... do the instructions provide how to hook into the doors so they come on when the doors open? or are these only full time on? Thanks.
 

·
Vendor
Joined
·
353 Posts
Discussion Starter · #12 ·
Getting plans in order ... do the instructions provide how to hook into the doors so they come on when the doors open? or are these only full time on? Thanks.
Our basic instructions don't provide a method on tapping into the door or map lighting, but it can be done.

Several DIY threads have been posted for the 5th Gen Camaro on how to install them to achieve that effect.

It's a little more complicated than the basic install, but some prefer the OEM "auto" dimming

Nick C.
 

·
Registered
Joined
·
4,590 Posts
Our basic instructions don't provide a method on tapping into the door or map lighting, but it can be done.

Several DIY threads have been posted for the 5th Gen Camaro on how to install them to achieve that effect.

It's a little more complicated than the basic install, but some prefer the OEM "auto" dimming

Nick C.
So with the basic install, the lights are on full time when the car is on?
 

·
Registered
Joined
·
114 Posts
I noticed you have the RGB halos but do you have any single color or can you custom fabricate perhaps?
 
1 - 20 of 37 Posts
Top