Modern Camaro Forums banner

1 - 20 of 29 Posts

·
Registered
Joined
·
123 Posts
Discussion Starter #1 (Edited)
Well guys the dyno results are in. The first dyno graph is the stock hp#'s. The second graph has our LMR Cold Air Induction System, Stainless Steel 1 7/8 long tube headers with connection pipes, modified factory exhaust(removed resonators) and our stage 2 custom grind cam kit. The third graph is our complete Street Stalker Package that includes:
LMR Cold Air Induction System
A/R 1 7/8 Stainless Steel Headers with connection pipes
MSD 8.5mm Wires
NGK spark plugs
160* Thermostat
Modified Factory mufflers(removed resonators)
LMR Stage 3 custom grind cam kit
Prototype 25% Underdrive Pulley Kit
All gaskets/Crank Bolt
Oil change with filter

Street Stalker Package Installed and Tuned for $5,999.99

http://www.youtube.com/watch?v=pD2AweUefhU



As you can see, these dyno #'s are SAE corrected, not STD correction like some of the other shops packages you are seeing advertised!
 

·
Registered
Joined
·
123 Posts
Discussion Starter #2 (Edited)
As featured on homepage.

Well guys the dyno results are in. The first dyno graph is the stock hp#'s. The second graph has our LMR Cold Air Induction System, Stainless Steel 1 7/8 long tube headers with connection pipes, modified factory exhaust(removed resonators) and our stage 2 custom grind cam kit. The third graph is our complete Street Stalker Package that includes:
LMR Cold Air Induction System
A/R 1 7/8 Stainless Steel Headers with connection pipes
MSD 8.5mm Wires
NGK spark plugs
160* Thermostat
Modified Factory mufflers(removed resonators)
LMR Stage 3 custom grind cam kit
Prototype 25% Underdrive Pulley Kit
All gaskets/Crank Bolt
Oil change with filter

Street Stalker Package Installed and Tuned for $5,999.99

http://www.youtube.com/watch?v=pD2AweUefhU






As you can see, these dyno #'s are SAE corrected, not STD correction like some of the other shops packages you are seeing advertised!
 

·
Registered
Joined
·
123 Posts
Discussion Starter #5
That's great, but will it pass emissions with no resonators and a new cam?
Yes, with the high flow cats and our dyno tune the car will pass emissions.
 

·
Registered
Joined
·
1,210 Posts
Nice. You guys going to test the quarter mile time?
 

·
Premium Member
Joined
·
2,717 Posts
Great numbers! With that setup I'm sure drag radials and some suspension bits are going to be a must.
 

·
Registered
Joined
·
646 Posts
impressive, look forward to seeing results at the track. What are the specs of the cam?

How come you didn't go with an aftermarket cat back exhaust?
 

·
Registered
Joined
·
123 Posts
Discussion Starter #9
Nice. You guys going to test the quarter mile time?
Yes, we will probably try and get a set of drag radials this week so we can hit up a track next weekend.
 

·
Registered
Joined
·
41 Posts
that's a big cam, when are you guys going to take this car to the track? this should be a high 11s car...
 

·
Registered
Joined
·
646 Posts
You can probably do everything but the cam, to keep the warranty. Not sure if removing the resonators will hurt the warranty, that's just for sound.
 

·
Registered
Joined
·
123 Posts
Discussion Starter #19

·
Registered
Joined
·
589 Posts
Sorry, but what is the difference between SAE and STD corrections. Usually and STD correction is a shot at your local free clinic.
 
1 - 20 of 29 Posts
Top