Modern Camaro Forums banner

1 - 20 of 22 Posts

·
Registered
Joined
·
518 Posts
Discussion Starter #1 (Edited)
Getting mine soon and want to create my top list.

Please share yours...done or planned.

Ok will start my list

1. Heritage Grille
2. CAI
3. Tinted windows
 

·
Premium Member
Joined
·
8,645 Posts
(1) Airaid CAI
(2) Magnaflow Exhaust
(3) Powdercoated Wheels
(4) Billet pedals
(5) Lloyd floor mats front and rear
(6) ACC sidemarkers painted and tinted
(7) Black Camaro letter on both sides and trunk(where bowtie was)
(8) Black tail light bezels and tinted tail lights
(9) Engine dress up kit
and most important
(10) Rare Litho signed by the awesome workers at the Oshawa Plant

Maybe do headers w/hi-flo cats later
 

·
Registered
Joined
·
720 Posts
(1) SLP loudmouth 1 exhaust [done]
(2) K&N Aircharger Cai [done]
(3) Window Tinting [done]
(4) Barton Shifter [done]
(5) full Black-out kit [done]
(6) Black Painted Wheels
(7) Custom airbrushed under-hood
(8) Custom painted Engine cover
(9) BBK Longtube Headers
(10) New Hood of some kind lol

i'd also like to add an entire BMR kit, sways springs, and strut tower brace
 

·
Registered
Joined
·
1,925 Posts
Top 10:
Magnacharger TVS2300
C.A.I Intake
DT Shorties
Pfadt Sways
Pfadt Coilovers
Pfadt Trailing Arms
Magnaflow 3" SS catback
Hotchkis Max Chassis Brace
GForce Axles
Window Tint inc Windshield(Airblue)


Others:
Hawk Ceramics
Spohn Toe Rods
Lloyds Mats (SS)
Pfadt End Links
SRP Pedals


Planned:
Custom CCW's (20x10 & 20x11.5) w/ Nitto Invo's (275/40 & 315/35)
Stage 1 blower cam/dod lifter removal/LS7 conversion
3.4 GatorGrip pulley
FTI 2800 stall
B&M Trans cooler
 

·
Registered
Joined
·
1,025 Posts
Done:
1. Painted engine cover
2. Tint all around
3. Flowmaster cat back
4. C.A.I. intake
5. American Racing Headers
6. Diablosport Trinity tune
7. Barton short throw
8. AAC lighting-blue interior and trunk, P13w drls and RGB Night Rider Scanner

next:
9. BMR strut bar and tunnel brace
10. rims and tires
 

·
Registered
Joined
·
5 Posts
(1) SLP loudmouth 1 exhaust [done]
(2) K&N Aircharger Cai [done]
(3) Window Tinting [done]
(4) Barton Shifter [done]
(5) full Black-out kit [done]
(6) Black Painted Wheels
(7) Custom airbrushed under-hood
(8) Custom painted Engine cover
(9) BBK Longtube Headers
(10) New Hood of some kind lol

i'd also like to add an entire BMR kit, sways springs, and strut tower brace
good choice on the exhaust . i put the same . no complaints.
 

·
Registered
Joined
·
2,794 Posts
Most of mine are done, see my sig, other than that, my next mods are

1. TVS 2300 Supercharger (7 March)
2. Pedders Street 2 Suspension
3. Pedders bushing replacement
4. Blower cam
5. hardened pushrods, pistons, springs, and valves
6. 3.2" pulley to make 10 Lbs of boost

I have a long range plan on these mods, probably three years or so to get everything done. My goal is that when it's paid off, it'll be ready for the road course or autocross course. It will be my weekend toy when I buy a DD Corvette.
 

·
Premium Member
Joined
·
2,624 Posts
1) Tinted Windows
2) 22" lexani Wheels
3) Painted Engine Cover/Fuse Box Top
4) Cold Air Inductions C.A.I.
5) Painted Dash Trim/Center Console
6) Flow-Pro Exhaust
7) Painted Heritage Grill/Lower Grill/Fog Light Bezels
8) Blacked out Tail Lights/Trim/Bow Tie/Under Trunk covers
9) Re-Powder Coated the lexani Wheels Black & IOM

** Waiting on Black Lettering & SS Emblems
** New Wheels, Undecided on
** Lowing Springs
** LED Lighting, In & Out
** Different Exhaust System, Undecided on Brand
** I'm sure there will be more over Time!!
 

·
Premium Member
Joined
·
4,818 Posts
1. Stripes and Blackout Painted.
2. Barton Automatic Piston grip shifter , Spoiler
3. Adm Race Cold Air intake
4. 1 7/8 American Racing Headers , Borla Stingers
5. L99 converted over to a LS3 with addition of a Cam and all new internals.
6. Ported Intake and LPE Throttle body , ATI underdrive pullie
7. Yank 3200 STall converter
8. Pfadt Trailing Arms and PFadt front and rear swaybars
9. Tech AFX Heater Hose Relocate Kit
10. 20x9 and 20x10.5 American Racing Torque Thrust.
11. Afterburner Taillights


Last two mods I have not yet installed

Pfadt Lowering Springs.
poly Bushings and solid subframe mounts


when I get the space in a few months im going to tear down my car throw in the lowering springs and the bushings and be done for a while.
 

·
Banned
Joined
·
7,873 Posts
1) 4.10's in the rear
2) Pfadt Springs/Sway bars
3) ARH Headers/Exhuast
4) Tune
5) LSR intake
6) Pfadt Trailing Arms, Diff bushings & Rear Tie-rods
7) No more gold bow-ties
8) Hurst Shifter
9) Stealth front turn-signal bulbs
10) Lloyds mats

Soon (maybe)...either a serious cam or E-force supercharger
 

·
Registered
Joined
·
525 Posts
1. Borla Long Tubes
1. Borla ATAK
1. C.A.I CAI
1. 25% Tint
5. Painted Stripes and accents
6. Heritage Grill
7. Sequential Tail Lights
8. Dual Color HALO's/Fog Lights(maybe)
9. Footwell Lighting(maybe)
10. Maggie Super Charger
 

·
Registered
Joined
·
37 Posts
  1. Whipple Supercharger
  2. Kooks Long Tube Headers
  3. Borla ATAK Exhaust
  4. Circle D Torque Converter
  5. Comp VVT Cam
  6. Full BMR Suspension
  7. 22" Savini SV21c Wheels
  8. Full Oracle Lighting System
  9. Showstopper Accessories LED Mirrors and Engine Covers
  10. IOM and matte black Paint Accents
I may have cheated. I combined the suspension, lighting and paint stuff. :)
 

·
Registered
Joined
·
396 Posts
  1. Whipple Supercharger
  2. Kooks Long Tube Headers
  3. Borla ATAK Exhaust
  4. Circle D Torque Converter
  5. Comp VVT Cam
  6. Full BMR Suspension
  7. 22" Savini SV21c Wheels
  8. Full Oracle Lighting System
  9. Showstopper Accessories LED Mirrors and Engine Covers
  10. IOM and matte black Paint Accents
I may have cheated. I combined the suspension, lighting and paint stuff. :)
You forgot about your spoiler. Lol what spoiler is that SLP?
 

·
Registered
Joined
·
4,449 Posts
1) cold air intake
2) cat-back exhaust
3) headers w/ high flow cats & a tune
4) sport springs, sway bars, poly bushings
5) heritage grill
6) supercharger
7) 3.73 or 4.10 gears & better axle shafts
8) heads/cam
9) torque converter or ZR-1 clutch
10) 3-piece forged lightweight wheels

i'm stuck at number 5... hopefully a Z28 or whatever they call it bumps me up to number 7! that's what i'm waiting on...
 

·
Registered
Joined
·
1,181 Posts
1. Window Tint
2. Hurst Shifter
3. OEM Gnd FX
4. Stripes
5. New Spoiler
6. Custom blue Seat Stiching
7. HUD install
8. Exhaust
9. CAI
10. ?? - Leather wrapped center console.
 

·
Registered
Joined
·
38 Posts
1. RS package (done
2. Ground effects (done)
3. Strip Package (done)
4. Hennessey CAI
5. Borla Exhaust
6. SLP skip shift elem. (shipped)
7. Oracle Lighting Upgrade (shipped)
8. Window Tint (done)
9. Super charger
10. Acessory gauge cluster
 
1 - 20 of 22 Posts
Top