Modern Camaro Forums banner

1 - 20 of 20 Posts

·
Premium Member
Joined
·
1,259 Posts
Discussion Starter #1
I came across these vids and i like they way they sound, even if your going with a different exhaust, it GREAT to see these kind of HP#s from JUST full exhaust.

from YouTube description.......

" Texas Speed & Performance
www.texas-speed.com

As most have probably seen, our 390-mile SS base lined at 372 RWHP and 372 RWTQ. FYI, the car is a six-speed manual. With the addition of our prototype TSP 1 7/8" long tube headers, off-road connection pipes, and cat-back exhaust, the car gained 26 RWHP and 35 RWTQ to net 398 RWHP and 407 RWTQ! Again, these are untuned numbers. Achieving 400+ RWHP with stock induction will be a walk in the park once it's tuned. We are very pleased with the results. The headers feature 1 7/8" primary tubes with 3" collectors, and the headers will be ceramic-coated inside and out! Our TSP Rumbler 5 cat-back exhaust system will use your choice of two OR four Dynomax bullet mufflers! The system being tested on our car uses the four mufflers, and it has a great sound to it, as you can hear in the video below! Our Rumbler 5 cat-back exhaust system will be a direct bolt-on system just behind the factory cats for those wanting to retain the stock exhaust manifolds and catalytic converters. The great part is that you can start with our Rumbler 5 cat-back exhaust system, and if you decide to add our TSP long tube headers down the road, with or without cats, it will all bolt up! No cutting or welding will be required!

These are preliminary results, and we will complete our results once we can monitor what the PCM is doing. We will also complete our testing of our TSP induction system for the 5th gen once tuning is available. FYI, we will have dyno numbers in a few days testing our Rumbler 5 cat-back exhaust as the only mod, for those interested. Not only will you be able to gain some nice power from the additional flow, but you'll also shed quite a bit of weight! The factory exhaust system is NOT light, particularly the trash cans GM calls mufflers. All said and done, I think it will be very feasible for new Camaro owners to legitimately make 420+ RWHP with bolt-on modifications! We have a few other bolt-on mods in the works that we should be done testing shortly. Give it some time, and you're going to see 500+ RWHP N/A '10 Camaros roaming the streets with heads/cam packages and bolt-on mods! Our new SuperFlow 902 engine dyno will be installed next week, and then we will begin our extensive LS3 and L99 VVT testing. All TSP products will be test-proven, both on our engine and chassis dynos. We will offer proven packages with real-world results for everyone to see. Our second '10 Camaro SS will hopefully be delivered in a month or less, so we will be able to test on multiple cars to guage consistency between vehicles. It will also give us another platform to try other mods! We are dedicated to providing the best parts and packages available with proven results. "
besides all that , it sounds SICK!
http://www.youtube.com/watch?v=dvqZ8VgAEYk&feature=related
http://www.youtube.com/watch?v=8NuCmGbkQaI&feature=related

BTW, their full header back system w/ highflow cats cost about $2600, but gets you about 420 rwhp!
 

·
Registered
Joined
·
646 Posts
Everybody and their mother is coming out with their own propietarty header/exhaust systems now.

But the prices are crazy! Corvette prices for a Camaro Yeow!
 

·
Premium Member
Joined
·
6,258 Posts

·
Premium Member
Joined
·
1,259 Posts
Discussion Starter #6 (Edited)
sorry, that sucks, but i could care less, i plan on doing the same **** thing when i get my car. i will probably buy from these guys just because they did run the car hard.
 

·
Premium Member
Joined
·
4,818 Posts
Notice how they mentioned the factory trash can mufflers that come on the car stock weigh a lot. Losing the manifolds the Cats all the way back to the mufflers and replacing it all with aftermarket headers , X pipe and mufflers is sure to losen up some weight :thumbsup:


I keep reading that below....music to my ears :D

"Not only will you be able to gain some nice power from the additional flow, but you'll also shed quite a bit of weight! The factory exhaust system is NOT light, particularly the trash cans GM calls mufflers. All said and done, I think it will be very feasible for new Camaro owners to legitimately make 420+ RWHP with bolt-on modifications! We have a few other bolt-on mods in the works that we should be done testing shortly. Give it some time, and you're going to see 500+ RWHP N/A '10 Camaros roaming the streets with heads/cam packages and bolt-on mods! "
 

·
Premium Member
Joined
·
4,818 Posts
sad



You know whats SAD if you Read this Article this is a company who is putting an exhaust on for Tom Henry Racings car dealership.
This is a CGM car meaning this is CGM #1 the first ever CGM car ever built that Tom Henry Racing is having sent to have a special exhaust put on for its new Owner. When I saw the color of the car then thought about it I remembered that the only color car THR has is the first ever car that happens to belong to Camaro5's moderator TagUrit. I have seen Tag on other boards he is a Very nice guy and show's pure class I dont think ANYONE would want to buy there car and see someone ragging on it like this on public internet. HELLO this is a New car......Break in miles anybody ??????

It took me a little bit to catch on to this but after watching this over and over and over because it sounded good I noticed the color and remember reading a post somewhere that THR was sending his first CGM car to have a custom exhaust done since it was #1.

So who wants to go buy a car and send it to this company so they can put a new exhaust on and roast your new 20inch perelli's ????????
Maybe down the road about 400miles later something will go wrong with this car and you are incharge of taking it into the dealership to get fixed ?

This is why I do my homework on who touches my Car.
I take down mileage and inspect everything before it goes into
hands of certain people. Not some company who wants to take my new Car on to the local public streets and rag it in not only ways I dont like them to but lets show the public how we can burn the tires and break the law.
Not saying I wouldnt ever do something like this a time or 2 but this is ME not someone who is working on my car.

Sorry guys I had to rant over this...........This company needs to be smarter about what they put on the internet. Yeah come buy my product I will install it rag on it and post it on the internet better yet YOUTUBE :thumbsup:
 

·
Premium Member
Joined
·
1,259 Posts
Discussion Starter #16
The TSP rumbler exhaust uses bullets. The SW is as you have pictured.
but this is the full exhaust in the video ( headers, hi flow cats, 3" all the way,ect.), i had called them to get pricing and see what was used in the video. its cheaper just to get it straight from Stainlessworks.net

i was even thinking of getting just the mufflers and putting them on with the black ss oynx tips
 

·
Registered
Joined
·
646 Posts
you should do that. I don't know bout ya'll but I can't fathom spending a grand on a exhaust. That's just crazy. Plus another grand for headers? come on now!

And ragging on a brand new CUSTOMER'S car without their knowledge is a thousand times wrong. I would be cracking skulls.
 

·
Registered
Joined
·
3,468 Posts
you should do that. I don't know bout ya'll but I can't fathom spending a grand on a exhaust. That's just crazy. Plus another grand for headers? come on now!

And ragging on a brand new CUSTOMER'S car without their knowledge is a thousand times wrong. I would be cracking skulls.
I got almost 4grand into my exhaust on my Z06 Kooks headers,Catless Xpipe,Electric Cutouts,B&B mufflers....To make it even louder than that Camaro...its music to my ears
 

·
Premium Member
Joined
·
4,818 Posts
I got almost 4grand into my exhaust on my Z06 Kooks headers,Catless Xpipe,Electric Cutouts,B&B mufflers....To make it even louder than that Camaro...its music to my ears
I'm probably looked about the same amount since everything you just mentioned is where I'm heading myself lol
 
1 - 20 of 20 Posts
Top